The Legato™ OEM 950 is based on the Legato™ 100 series syringe pump design, the Legato® 950 is ideal for applications interfacing to a computer through a USB interface.

The KDS 900 Microliter and KDS 910 Milliliter syringe pump modules are highly precise, they are ideal pumps for OEM applications. Two modes of operation–constant flow rate or volume dispense. Infuse and withdraw limit switches indicate when the syringe has reached the end of travel (infuse switch) or the syringe plunger has been withdrawn to its limit (withdraw switch). If either switch is activated, the pusher block movement is stopped.

Syringe diameter, flow rates, and target volumes are stored in non-volatile memory. Interface to the pump modules is through RS232 or USB (model dependent). 

List Grid

Set Descending Direction

3 Item(s)

  1. Legato 950 OEM Syringe Pump
    Single Syringe, Infusion/Withdrawal OEM Module

    • Infuse / Withdraw
    • No. of syringes: 1
    • Syringe size: 0.5 µl to 60 ml
    • ±0.5% Accuracy
  2. KDS 900 Legacy OEM Syringe Pump
    Single Syringe, Microliter, OEM, Infusion/Withdrawal Pump

    • Infuse / Withdraw
    • No. of syringes: 1
    • Syringe size: 0.5 µl to 60 ml
    • Linear Force – minimum of 7 lb over entire range
  3. KDS 910 Legacy OEM Syringe Pump
    Single Syringe, Milliliter, OEM, Infusion/Withdrawal Pump

    • Infuse / Withdraw
    • No. of syringes: 1
    • Syringe size: 0.5 µl to 60 ml
    • Linear Force – minimum of 25 lb over entire range

List Grid

Set Descending Direction

3 Item(s)