Legato® 270 / 270P Syringe Pump

Legato® 270 / 270P Syringe Pump
Dual Syringe, Programmable Touch Screen, Continuous Flow, Push-Pull Pump

Push-Pull syringe pump. Accommodate two syringes for infusion and two syringes for withdrawal. These models support infusion and withdrawal simultaneously at user defined flow rates and with selectable target volumes to control the total volume pumped. They also support infuse only, withdraw only, infuse/withdraw/ withdraw/infuse and continuous mode, user-defined flow rates with selectable target volumes.

The 270P Model allows user defined configurations/programs of up to 800 steps. Up to 40 programs of 20 steps each step can be stored in memory.

 

A version with 0-10 VDC Analog Control is also available. 


Code Product  
788270

Legato® 270 Dual Syringe, Touch Screen, Continuous Flow, Push-Pull Pump  

 
788272

Legato® 270p Dual Syringe, Programmable Touch Screen, Continuous Flow, Push-Pull Pump  

 
788272-AI

Legato® 270AC Dual Syringe, Programmable Touch Screen, Continuous Flow, Push-Pull Pump with Analog Control  

 
  • Holds one or two syringes from 0.5 µl to 140 ml
  • High resolution color touch screen
  • Real time clock
  • Unparalleled ease of use
  • Touch pad "lock" feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 75 lbs linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
  • Programmable (270P Model)
Accuracy
  • ±0.35%
Syringes (Min/Max)
  • 0.5 µl to 140 ml
Flow Rate
  • Minimum (0.5 µl syringe): 3.06 pl/min
  • Maximum (140 ml syringe, 37.948 mm inner diameter): 215.8 ml/min
Display
  • 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory
  • Stores all Settings
Connectors
  • RS232 - 9Pin D-Sub Connector
  • RS485 - IEEE-1394 6 pos
  • USB - Type B
  • I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
  • 34 kg (75 lb) @ 100% Force Selection
Drive Motor
  • 1.8 degree Stepper Motor
Motor Drive Control
  • Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
  • 6,400
Step Rate - Minimum
  • 27.5 sec/µstep
Step Rate - Maximum
  • 26 µsec/µstep
Pusher Travel Rate - Minimum
  • 0.36 µm/min
Pusher Travel Rate - Maximum
  • 190.80 mm/min
Power
  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions
  • 16.51 x 25.4 x 27.94 cm (6.5 x 10 x 11 in)
Weight
  • 4.9 kg (10.75 lb)
Operating Temperature
  • 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
  • -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity
  • 20% to 80% RH non condensing
Mode of Operation
  • Continuous
Classification
  • Class 1
Pollution Degree
  • 1
Installation Category
  • II
Regulatory Certification
  • CE, UL, CSA, CB Scheme, EU RoHS