Legato® 950 OEM Syringe Pump

Legato® 950 OEM Syringe Pump
Single Syringe, Infusion/Withdrawal OEM Module
Order Code: 788950

Based on the Legato® 100 series syringe pump design, the Legato® 950 is ideal for applications interfacing to a computer. Accommodates syringes 0.5 μl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.


• ± 0.5% Accuracy

• 0.5 μl to 60 ml syringes

• Continuous mode of operation

• Programmable with ASCII commands

• Encoder stall detection

• USB Interface

• TTL Interface

• Customizable syringe mechanisms available

• Customizable chassis designs available

• Advanced micostepping techniques

• Linear force 30 lbs (13.6 kg)

• CE, CB Scheme, EU RoHS compliant

Accuracy
  • ±0.5%
Syringes (Min/Max)
  • 0.5 µl to 60 ml
Flow Rate
  • Minimum (0.5 µl syringe): 1.28 pl/min
  • Maximum (10 ml syringe): 25.99 ml/min
  • Maximum (60 ml syringe): 88.28 ml/min
Non-Volatile Memory
  • Stores all Settings
Connectors
  • RS485 - IEEE-1394 6 pos
  • USB - Type B
  • I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
  • 13.6 kg (30 lb) @ 100% Force Selection
Drive Motor
  • 0.9 Stepper Motor
Motor Drive Control
  • Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
  • 15,360
Step Revolution
  • 0.069 µm/step
Step Rate - Minimum
  • 27.5 sec/µstep
Step Rate - Maximum
  • 26 usec/µstep
Pusher Travel Rate - Minimum
  • 0.15 µm/min
Pusher Travel Rate - Maximum
  • 159 mm/min
Power
  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions
  • 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight
  • 2.66 kg (5.9 lb)
Operating Temperature
  • 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
  • -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity
  • 20% to 80% RH non condensing
Mode of Operation
  • Continuous
Classification
  • Class 1
Pollution Degree
  • 1
Installation Category
  • 11
Regulatory Certification
  • CE, UL, CSA, CB Scheme, EU RoHS