Welcome to KD Scientific Syringe Pumps !    

Phone: 508-429-6809       Email: info@kdscientific.com       Support Center

Legato® 380 Emulsifier

Legato 380 Emulsifier
Legato® 380 Emulsifier
Legato® 380 Emulsifier/Homogenizer
Order Code: 788380

The NEW Legato® 380 emulsifying system is based on the Legato® Series of syringe pumps. It utilizes a modified Legato® 210P and Legato® 270P.

 

All the standard features of the Legato® products are still available, but a custom emulsification program has been added to the software. This program is only available with the Legato® 380 system.

 

The Legato® 210P and Legato® 270P can also be used as stand-alone syringe pumps. The emulsifiying system mimics the same action as in manually pushing fluid back and forth between syringes, but does it automatically. You select the volume and the emulsifying rate. The pumps will automatically move the fluid back and forth between the syringes for a user determined time or number of cycles.


  • Selectable emulsifying rates

  • Selectable volumes

  • Adjustable duration – Enter the number of cycles or the

    total time

Accuracy
  • ±0.35%
Syringes (Min/Max)
  • 0.5 µl to 140 ml
Flow Rate
  • Minimum (0.5 µl syringe): 5 pl/min
  • Maximum (140 ml syringe): 220.97 ml/min
Display (per syringe pump)
  • 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory
  • Stores all Settings
Connectors
  • RS232 - 9Pin D-Sub Connector
  • RS485 - IEEE-1394 6 pos
  • USB - Type B
  • I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
  • 34 kg (75 lb) @ 100% Force Selection
Drive Motor
  • 1.8 degree Stepper Motor
Motor Drive Control
  • Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
  • 6,400
Step Rate - Minimum
  • 27.5 sec/µstep
Step Rate - Maximum
  • 26 µsec/µstep
Pusher Travel Rate - Minimum
  • 0.36 µm/min
Pusher Travel Rate - Maximum
  • 190.80 mm/min
Power
  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions (per syringe pump)
  • 8.89 x 25.4 x 27.94 cm (3.5 x 10 x 11 in)
Weight (per syringe pump)
  • 4.9 kg (10.75 lb) per syringe pump
Operating Temperature
  • 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
  • -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity
  • 20% to 80% RH non condensing
Mode of Operation
  • Continuous
Classification
  • Class 1
Pollution Degree
  • 1
Installation Category
  • 11
Regulatory Certification
  • CE, UL, CSA, CB Scheme, EU RoHS
Legato 200 Series Manual
Legato Emulsifier Quick Start Guide
KDS Legato® Family Datasheet
Declaration of Conformity for the Legato 200 Series Syringe Pumps