Legato® 110 DRS (Dual Rate System) Syringe Pumps

Legato® 110 DRS (Dual Rate System) Syringe Pumps
Two Legato® 110 Single Syringe Pumps with connection cable
Order Code: 788110DRS

The new Legato 110 Dual Rate Syringe Pump System (Legato 110 DRS) offers researchers complete flexibility to start two pumps simultaneously for delivery of two independent flow rates. The pumps communicate through a special input/output cable included with the system.

 

The Legato 110 DRS comes complete with two programmable infuse / withdraw syringe pumps along with an input / output communications cable to synchronously operate the pumps. This innovative syringe pump system allows the user to configure two different pumps with independent flow rates using the built in multistep programming and input / output signal communication.

 

All control is set through the innovative Legato touch screen user interface. No external programming or computer is required.

 

Both syringe pumps in the system have a wide flow rate range from 1.28 pl/min to 88.28 ml/min. Each pump can be individually set for whatever the experiment requires.

 

The syringe pumps are compatible with stainless steel, plastic or glass. The syringes are held in place by KD Scientific’s new clamping mechanism designed to hold the syringes securely in place. Syringe sizes from 0.5 ul to 60 ml can be used. The Legato 110 Dual Rate Syringe Pump System has an accuracy of +/-0.5% and a reproducibility of +/- 0.05%.


    This syringe pump system allows the user to configure two different pumps with independent flow rates using the built in multistep programming and input / output signal communication. All control is set through the innovative Legato touch screen user interface. No external computer is required.
Accuracy
  • ±0.5%
Syringes (Min/Max)
  • 0.5 µl to 60 ml
Flow Rate
  • Minimum (0.5 µl syringe): 1.28 pl/min
  • Maximum (10 ml syringe): 25.99 ml/min
  • Maximum (60 ml syringe): 88.28 ml/min
Display
  • 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory
  • Stores all Settings
Connectors
  • RS485 - IEEE-1394 6 pos
  • USB - Type B
  • I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
  • 13.6 kg (30 lb) @ 100% Force Selection
Drive Motor
  • 0.9 Stepper Motor
Motor Drive Control
  • Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
  • 15,360
Step Revolution
  • 0.069 µm/step
Step Rate - Minimum
  • 27.5 sec/µstep
Step Rate - Maximum
  • 26 usec/µstep
Pusher Travel Rate - Minimum
  • 0.15 µm/min
Pusher Travel Rate - Maximum
  • 159 mm/min
Power
  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions
  • 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight
  • 2.66 kg (5.9 lb)
Operating Temperature
  • 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
  • -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity
  • 20% to 80% RH non condensing
Mode of Operation
  • Continuous
Classification
  • Class 1
Pollution Degree
  • 1
Installation Category
  • 11
Regulatory Certification
  • CE, UL, CSA, CB Scheme, EU RoHS