KDS 900 Legacy OEM Syringe Pump

KDS 900 Legacy OEM Syringe Pump
Single Syringe, Microliter, OEM, Infusion/Withdrawal Pump
Order Code: 782900

The KDS 900 Microliter syringe pump is a highly precise, ideal pump for OEM applications. Two modes of operation–constant flow rate or volume dispense. Infuse and withdraw limit switches indicate when the syringe has reached the end of travel (infuse switch) or the syringe plunger has been withdrawn to its limit (withdraw switch). If either switch is activated, the pusher block movement is stopped.

Syringe diameter, flow rates, and target volumes are stored in non-volatile memory. Interface to the pump module is through RS232.
  • Constant Current Drive offers more consistent force delivery over the entire dynamic flow rate range
  • Independent infuse and withdraw limit switches
  • Linear Force – Minimum 7 lb over entire range
  • Emergency stop switch at pump
  • Start/stop at pump
  • Encoder for stall detection
  • Power and run LED on the PC Board
  • Supports external run LED
  • Network up to 16 pumps
  • ±0.35% Accuracy
  • Pump setting retained in NVRAM
  • Adjustable force control
  • Easily mounts to panel openings
  • Customizable syringe mechanisms available
  • Customizable chassis designs available
  • Lead Free Design, RoHS compliant
  • CE approved
Number of Syringes
  • One
Syringe Size
  • 0.5 μl - 1 ml
Min. Flow Rate
  • 0.001 μl/hr (0.5 µl syringe)
Max. Flow Rate
  • 1.33 ml/min (1ml syringe) 
Linear Force
  • 7 lb (peak) Adj.
Advance per Microstep
  • 0.0827 micron (1/16 step)
Max. Step Rate
  • 50 µsec/step
Min. Step Rate
  • 3.8 sec/step
  • ±< 0.35%
  • 7.25 x 3.63 x 4.5 in (18.41 x 9.2 x 11.43 cm)
  • 1.8 lb (0.8 kg)