KDS 230 / 230P Legacy Syringe Pump

KDS 230 / 230P Legacy Syringe Pump
Multi-Syringe, Infusion/Withdrawal Pump
Ideal for applications requiring multiple syringes, the KDS230 is an adaptation of the KDS210. The pump operates exactly like a KDS210, but has been modified to hold up to 10 syringes.
Code Product  
No options of this product are available.
  • Multiple syringe holder:
    - One to ten syringes, 10 µl - 10 ml
    - One to six syringes, 20 ml - 60 ml
    - One to four syringes, 100 ml - 140 ml
  • Withdrawal then infusion
  • Backlit LCD display
  • Knob locks/unlocks drive block for effortless, drag-free manual adjustment
  • Simple menu-driven setup:
    - select syringe size from displayed table
    - set dispense volume
    - set dispense flow rate
  • Continuous dispense volume display
  • Preset volume control and automatic shut-off
  • Choice of unit selection
  • Settings can be reviewed or changed during operation
  • Stall detection
  • Last settings stored in permanent memory
  • Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
  • TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
  • Multiple mode selection:
    - Infusion, Withdrawal, Infusion then withdrawal, Withdrawal then infusion, Continuous cycle
  • Optional multi-step keypad programmable feature (KDS230P)
Max. No. of Syringes
  • Ten
Syringe Size
  • 10 µl to 10 ml (10 syringes)
  • 20 ml to 60ml (6 syringes)
  • 100 ml to 140 ml (4 syringes)
Dimensions
  • 11 x 9 x 5.5 in.
  • 28 x 23 x 14 cm
Weight
  • 9 lb (4 kg)
Linear Force
  • 40 lb (18 kg)
Advance Per Microstep
  • 0.165 micron (1/16 step)
Max Step Rate (1/2 Step)
  • 1600/sec
Min Step Rate
  • 1 step / 100 sec.
Accuracy
  • ±<1%
Audible Alarm
  • (Optional) **