Legato® 200 Syringe Pumps

Legato® 200 Syringe Pumps
Dual Syringe Infusion Pump
Order Code: 788200

Infuse only dual syringe pump. Accommodates 2 syringes. User definable flow rates with selectable target volume or time values to control the total infusion volume.
  • Holds one or two syringes from 0.5 µl to 140 ml
  • High resolution color touch screen
  • Real time clock
  • Unparalleled ease of use
  • Touch pad "lock" feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 75 lb linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
Accuracy
  • ±0.35%
Reproducibility
  • ±0.05%
Syringes (Min/Max)
  • 0.5 µl to 140 ml
Flow Rate
  • Minimum (0.5 µl syringe): 3.06 pl/min
  • Maximum (140 ml syringe, 37.948 mm inner diameter): 215.8 ml/min
Display
  • 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory
  • Stores all Settings
Connectors
  • RS232 - 9Pin D-Sub Connector
  • RS485 - IEEE-1394 6 pos
  • USB - Type B
  • I/O & TTL - 15 pin D-Sub Connector
Linear Force (Max)
  • 34 kg (75 lb) @ 100% Force Selection
Drive Motor
  • 1.8 degree Stepper Motor
Motor Drive Control
  • Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
  • 6,400
Step Rate - Minimum
  • 27.5 sec/µstep
Step Rate - Maximum
  • 26 usec/µstep
Pusher Travel Rate - Minimum
  • 0.36 µm/min
Pusher Travel Rate - Maximum
  • 190.80 mm/min
Power
  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions
  • 16.51 x 25.4 x 27.94 cm (6.5 x 10 x 11 in)
Weight
  • 4.9 kg (10.75 lb)
Operating Temperature
  • 4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature
  • -10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity
  • 20% to 80% RH non condensing
Mode of Operation
  • Continuous
Classification
  • Class 1
Pollution Degree
  • 1
Installation Category
  • II
Regulatory Certification
  • CE, UL, CSA, CB Scheme, EU RoHS