KDS 120 Legacy Push-Pull, Single Cycle, Nanoliter Syringe Pump

KDS 120 Legacy Push-Pull, Single Cycle, Nanoliter Syringe Pump
Two-Syringe Nanoliter Push-Pull Pump
Two-Syringe Nanoliter Push-Pull Pump provides simultaneous infusion and withdrawal at the same rate with opposing syringes on the same drive. The Push-Pull mode is designed for one cycle only.
Code Product  
780120

KDS 120 Legacy Two Syringe, Single Cycle, Push-Pull Pump - 110 VAC  

 
789120

KDS 120 Legacy Two Syringe, Single Cycle, Push-Pull Pump - 220 VAC  

 
780120J

KDS 120 Legacy Two Syringe, Single Cycle, Push-Pull Pump - 110 VAC with Japanese Syringe Table  

 
  • Dual syringe, push-pull, single cycle
  • 10 µl to 10 ml, any manufacturer
  • Simple menu-driven setup:
    - select syringe size from displayed table
    - set dispense volume
    - set dispense flow rate
  • Easy to read bright, backlight display
  • Dispense volume displayed and has automatic shutoff at completion
  • Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size
  • Last settings stored in permanent memory
  • Button release of drive nut for easy syringe installation
  • Choice of run / stop after a power interruption
Max. No. of Syringes
  • Two
Syringe Size
  • 10 µl to 10 ml
Dimensions
  • 9 x 6 x 5 in.
  • 23 x 15 x 12 cm
Weight
  • 4.5 lb (2 kg)
Linear Force
  • 20 lb (9 kg) min.
Advance Per Microstep
  • 0.529 micron (1/2 step)
Max Step Rate (1/2 Step)
  • 400 steps/sec
Min Step Rate
  • 1 step / 30 sec.
Accuracy
  • ±<1%
Reproducibility
  • ±0.1%
Audible Alarm
  • (Optional) **